ISO 717-1:2020

International Standard   Current Edition · Approved on 02 December 2020

Acoustics — Rating of sound insulation in buildings and of building elements — Part 1: Airborne sound insulation

ISO 717-1:2020 Files

English 26 Pages
Current Edition
OMR 61.89

ISO 717-1:2020 Scope

This document

a) defines single-number quantities for airborne sound insulation in buildings and of building elements such as walls, floors, doors, and windows,

b) takes into consideration the different sound level spectra of various noise sources such as noise sources inside a building and traffic outside a building, and

c) gives rules for determining these quantities from the results of measurements carried out in one-third-octave or octave bands for example in accordance with ISO 10140-2 and ISO 16283-1.

The single-number quantities in accordance with this document are intended for rating airborne sound insulation and for simplifying the formulation of acoustical requirements in building codes. An additional single-number evaluation in steps of 0,1 dB is indicated for the expression of uncertainty (except for spectrum adaptation terms). The required numerical values of the single-number quantities are specified according to varying needs. The single-number quantities are based on results of measurements in one-third-octave bands or octave bands.

For laboratory measurements made in accordance with ISO 10140-2, single-number quantities are calculated using one-third-octave bands only.

The rating of results of measurements carried out over an enlarged frequency range is dealt with in Annex B.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
GSO 2055-1:2015
 
Gulf Technical Regulation
Halal Products - Part 1 : General Requirements
GSO 9:2022
 
Gulf Technical Regulation
Labeling of prepackaged food stuffs
GSO 150-1:2013
 
Gulf Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates

Recently Published

ISO 21611:2026
 
International Standard
Dentistry — Vocabulary for source conclusion for human identification by dental evidence
ISO 21815-4:2026
 
International Standard
Earth-moving machinery — Collision warning and avoidance — Part 4: Risk area and risk level for swing and rotation motion
ISO 4576:2026
 
International Standard
Plastics — Polymer dispersions — Determination of sieve residue
ISO 8553:2026
 
International Standard
Milk — Enumeration of microorganisms — Plate-loop technique at 30 °C