GSO ISO 24528:2023

ISO 24528:2021
Gulf Standard   Current Edition · Approved on 28 February 2023

Service activities relating to drinking water supply, wastewater and stormwater systems — Guideline for a water loss investigation of drinking water distribution networks

GSO ISO 24528:2023 Files

English 60 Pages
Current Edition Reference Language
83.34 OMR

GSO ISO 24528:2023 Scope

This document provides a methodology for undertaking a water loss investigation and establishing general principles for water loss management in drinking water distribution networks in order to improve the sustainability of drinking water utilities and protect the environment by saving water, energy and use of chemicals.

This document establishes a procedure to estimate water loss components through water balance calculations and to define general principles of water loss management. This document deals with the preparation of a water loss management plan for water loss reduction and management projects but does not cover its execution.

This document does not cover bulk drinking water supply systems, but can relate to pumping, storage and transmission within the drinking water distribution network.

This document can be used analogously for non-public supply systems, raw water and industrial water systems.

This document is intended for drinking water utilities and other stakeholders.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ISO 10468:2024
ISO 10468:2023 
Gulf Standard
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
GSO ISO 10300-1:2024
ISO 10300-1:2023 
Gulf Standard
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors
GSO ISO 11114-5:2024
ISO 11114-5:2022 
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 5: Test methods for evaluating plastic liners
GSO ISO 4211-5:2024
ISO 4211-5:2021 
Gulf Standard
Furniture — Tests for surface finishes — Part 5: Assessment of resistance to abrasion