GSO ISO 14405-3:2021

ISO 14405-3:2016
Gulf Standard   Current Edition · Approved on 01 July 2021

Geometrical product specifications (GPS) — Dimensional tolerancing — Part 3: Angular sizes

GSO ISO 14405-3:2021 Files

GSO ISO 14405-3:2021 Scope

This part of ISO 14405 establishes the default specification operator for angular size and defines a number of special specification operators for features of angular size: cone (truncated, i.e. frustum, or not), wedge (truncated or not), two opposite straight lines (intersection of a wedge/truncated wedge and a plane perpendicular to the intersection straight line of the two planes of the wedge/truncated wedge, intersection of a cone/frustum and a plane containing the axis of revolution of the cone/frustum). See Figure 1 and Figure 2.

This part of ISO 14405 also defines the specification modifiers and the drawing indications for these angular sizes.

This part of ISO 14405 covers the following angular sizes:

—    local angular size:

—    angular size between two lines;

—    portion angular size;

—    global angular size:

—    direct global angular size:

—    least squares angular size;

—    minimax angular size;

—    rank order angular size/indirect global angular size:

—    maximum angular size;

—    minimum angular size;

—    average angular size;

—    range of angular sizes;

—    mid-range angular size;

—    median angular size;

—    standard deviation of angular size.

This part of ISO 14405 defines the meaning of tolerances of angular sizes indicated as

—    + and/or - limit deviations, e.g. 0°/-0,5°, or

—    indicated with upper limit of size (ULS) and/or lower limit of size (LLS), e.g. 35° max. or 15° min., 34°/36°,

—    with or without modifiers.

This part of ISO 14405 provides a set of tools to express several types of angular size characteristics. It does not give any information on the relationship between a function or a use and an angular size characteristic.

Best Sellers From Metrology Sector

GSO OIML R87:2021
OIML R87:2016 
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015 
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R76-1:2009
OIML R 76-1:2006 
Omani Standard
Non-automatic weighing instruments – Part 1: Metrological and technical requirements - Tests
GSO OIML R 76-1:2009
OIML R 76-1:2006 
Gulf Standard
Non-automatic weighing instruments – Part 1: Metrological and technical requirements - Tests

Recently Published from Metrology Sector

GSO 266:1994
 
Gulf Standard
Method of verification of weighbridges for road vehicles (Trucks)
OS GSO 162:1993
GSO 162:1993 
Omani Standard
VERIFICATION METHOD FOR COMMERCIAL LENGTH MEASURES
OS GSO 266:1994
GSO 266:1994 
Omani Standard
Method of verification of weighbridges for road vehicles (Trucks)
OS GSO 1466:2002
GSO 1466:2002 
Omani Standard
Metals hardness values tabels: test of tensile and hardness