GSO ISO 4412-3:2013
Gulf Standard
Current Edition
·
Approved on
09 September 2013
·
Hydraulic fluid power -- Test code for determination of airborne noise levels -- Part 3: Pumps -- Method using a parallelepiped microphone array
GSO ISO 4412-3:2013 Files
English
9 Pages
Current Edition
Reference Language
28.76 OMR
GSO ISO 4412-3:2013 Scope
This part of ISO 4412 describes procedures for the determination of the sound power levels of a hydraulic fluid power pump, under controlled conditions of installation and operation, suitable for providing a basis for comparing the noise levels of pumps in terms of
— A-weighted sound power level;
— one-third octave band power level.
From these sound power levels, if required, reference sound pressure levels may be calculated for reporting purposes (see clause 11).
For general purposes, the frequency range of interest includes the one-third octave bands with centre frequencies between 100 Hz and 10 000 Hz.1)
This part of ISO 4412 is applicable to all types of hydraulic fluid power pumps operating under steady-state conditions, irrespective of size, except for any limitations imposed by the size of the test environment (see clause 3).
Best Sellers From Metrology Sector
GSO OIML R87:2021
OIML R87:2016
Gulf Standard
Quantity of product in prepackages
GSO OIML R79:2021
OIML R79:2015
Gulf Standard
Labeling requirements for prepackages
OS GSO OIML R76-1:2009
GSO OIML R 76-1:2009
Omani Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
GSO OIML R 76-1:2009
OIML R 76-1:2006
Gulf Standard
Non-automatic weighing instruments –
Part 1: Metrological and technical requirements - Tests
Recently Published from Metrology Sector
GSO IEC 62586-1:2024
IEC 62586-1:2017
Gulf Standard
Power quality measurement in power supply systems - Part 1: Power quality instruments (PQI)
GSO ISO 26101-1:2024
ISO 26101-1:2021
Gulf Standard
Acoustics — Test methods for the qualification of the acoustic environment — Part 1: Qualification of free-field environments
GSO ISO/TR 17534-4:2024
ISO/TR 17534-4:2020
Gulf Standard
Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1
GSO ISO 12999-1:2024
ISO 12999-1:2020
Gulf Standard
Acoustics — Determination and application of measurement uncertainties in building acoustics — Part 1: Sound insulation