GSO EN 12853:2001+A1:2011

EN 12853:2001+A1:2010
Gulf Standard   Current Edition · Approved on 12 October 2011

Food processing machinery - Hand-held blenders and whisks - Safety and hygiene requirements

GSO EN 12853:2001+A1:2011 Files

GSO EN 12853:2001+A1:2011 Scope

1.1 This European Standard specifies the safety and hygiene requirements for the design and manufacture of hand-held blenders and whisks used in the commercial and institutional catering, and in food shops. The term "hand-held blenders" is used to refer to the equipment covered by this standard. The machines covered by this standard are hand-held appliances whose tool is intended to process a foodstuff in a container. Tools are designed to crush, mix, mash, emulsify, etc. foodstuffs such as vegetables into soups, mashes, purees, sauces, mayonnaise, cream, dairy products and more generally to process all solid, liquid, pasty or powdery foodstuffs to obtain a homogeneous fluid. These appliances are designed to process up to 100 l of food in one operation. This standard applies to the following machines, according to their weight and to the operating modes required by their intended use: - manually operated machines, using one or both hands, actuated throughout the whole operation (see figure 1); - machines operating resting on the bottom of the container (see figure 2); - machines fixed to or placed on a special support which can be fitted to the container (see figure 3). The support acts as a substitute for the operator for operations that take a long time or for food processing which may present risks of burns (steam or splashes). Figure 1 - Manually operated machine Figure 2 - Free-standing machine Figure 3 - Fixed machine 1.2 This standard does not apply to: - domestic machines; - vertical crushers, sieves mounted on trolleys and beam mixers (beam mixers are covered by EN 12854:2003). 1.3 This European Standard specifies all significant hazards, hazardous situations and events relevant to hand-held blenders and whisks, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). This European Standard deals wi

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ECE R 51:2024
ECE R 51:2023 
Gulf Standard
Uniform provisions concerning the approval of motor vehicles having at least four wheels with regard to their sound emissions
GSO ISO 13256-1:2024
ISO 13256-1:2021 
Gulf Standard
Water-source heat pumps — Testing and rating for performance — Part 1: Water-to-air and brine-to-air heat pumps
GSO EN 13077:2024
EN 13077:2023 
Gulf Standard
Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B
GSO ASTM E2218:2024
ASTM E2218:23 
Gulf Standard
Standard Test Method for Determining Forming Limit Curves