ISO 24650:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٠ سبتمبر ٢٠٢٤

Road vehicles — Sensors for automated driving under adverse weather conditions — Assessment of the cleaning system efficiency

ملفات الوثيقة ISO 24650:2024

الإنجليزية 21 صفحات
الإصدار الحالي
56.37 OMR

مجال الوثيقة ISO 24650:2024

This document proposes a standard test procedure to assess the efficiency of cleaning systems for sensors. It addresses the following conditions:

     dust/mud

     frost/snow

     mist/rain

This document does not propose a preferred cleaning system. This document is intended to be technologically neutral and performance-oriented. Its focus is on the cleaning system, not on sensor detection. The assessment method specified in this document is therefore fully independent from sensor technology and from the data generated by the sensor when in use.

This document is entirely focussed on the cleanliness of the front surface of the sensor.

This document does not address continuous contamination, such as continuous rain. This is because in these circumstances, the efficiency of the cleaning system can only be assessed from inside the sensor.

For non-continuous contamination, this document includes intermittent cleaning, which is considered a succession of cleaning cycles that are launched periodically, as defined in 3.2.

The test does not include specific day time/night time conditions. This is because these conditions have no impact on the results and the average clean remains similar. However, more efficient cleaning can be done at night.

This document does not cover contamination with insects due to the challenges of ensuring homogeneous application.

This document does not provide indicators for sensor performance. This document is limited to the evaluation of the removal of contamination from surfaces.

This document does not include evaluation on preventive measures taken in the installation design. The aerodynamic design affects how mud sprayed from a moving vehicle or rain droplets can reach and build-up on the sensor's frontal protection layer. Countermeasure design is beyond the scope of this document.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 5674:2024
 
مواصفة قياسية دولية
Tractors and machinery for agriculture and forestry — Guards for power take-off (PTO) drive-shafts — Strength and wear tests and acceptance criteria
ISO 15373:2024
 
مواصفة قياسية دولية
Plastics — Polymer dispersions — Determination of free formaldehyde
ISO 8000-210:2024
 
مواصفة قياسية دولية
Data quality — Part 210: Sensor data: Data quality characteristics
ISO 20251:2024
 
مواصفة قياسية دولية
Textile floor coverings — Water impermeability test