ISO 13348:2025

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٦ يونيو ٢٠٢٥

Fans — Tolerances, methods of conversion and technical data presentation

ملفات الوثيقة ISO 13348:2025

الإنجليزية 77 صفحات
الإصدار الحالي
96.12 OMR

مجال الوثيقة ISO 13348:2025

This document specifies performance tolerances and the technical data presentation for fans of all types. It does not apply for fans designed solely for low-volume air circulation, such as those used for household or similar purposes (ceiling and table fans, extractor fans, etc.). For jet fans, refer to ISO 13350.

The upper limit of fan work per unit mass is normally 25 kJ/kg, corresponding to an increase of fan pressure of approximately 30 kPa for a mean density in the fan of 1,2 kg/m3. For higher values, agreement is to be reached between the supplier and the user.

This document applies the five installation categories defined in ISO 5801:

              A            free inlet, free outlet;

              B            free inlet, ducted outlet;

              C           ducted inlet, free outlet;

              D           ducted inlet, ducted outlet;

              E            free inlet and free outlet without a partition.

The performance of a fan can vary considerably with the installation category it is operating within. Therefore, these categories form an important part of the definition of the fan’s technical data presentation.

NOTE   International acceptance of the five installation categories provides the opportunity to base a contract on the most appropriate fan category for the end user and the system designer. Correspondingly, the likelihood of the fan providing the agreed performance, without compromise or concession, is enhanced.

The efficiency scaling procedures described in 8.1.5 apply to centrifugal fans and axial fans within the specific speed ranges shown in Table 4. To date, there is no experimental data to confirm how they apply to mixed flow fans, having specific speeds in between.

Category E fans are treated in Clause 7.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 1952:2025
 
مواصفة قياسية دولية
Coal — Determination of extractable metals in dilute hydrochloric acid
ISO 5834-1:2025
 
مواصفة قياسية دولية
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 1: Powder form
ISO 5834-3:2025
 
مواصفة قياسية دولية
Implants for surgery — Ultra-high-molecular-weight polyethylene — Part 3: Accelerated ageing methods after gamma irradiation in air
ISO 15238:2025
 
مواصفة قياسية دولية
Coal — Determination of total cadmium