ISO 12141:2024
International Standard
Current Edition
·
Approved on
17 September 2024
Stationary source emissions — Determination of low range mass concentration of dust — Manual gravimetric method
ISO 12141:2024 Files
English
53 Pages
Current Edition
96.42 OMR
ISO 12141:2024 Scope
This document specifies the standard reference method (SRM) for the measurement of low dust concentration in ducted gaseous streams in the concentrations below 50 mg/m3 at standard conditions.
This document is primarily developed and validated for gaseous streams emitted by waste incinerators. More generally, it can be applied to gases emitted from other stationary sources, and to higher concentrations.
If the gases contain unstable, reactive or semi-volatile substances, the measurement depends on the sampling and filter treatment conditions.
This method has been validated in field tests with special emphasis to dust concentrations around 5 mg/m3. The results of the field tests are presented in Annex A.
Best Sellers
GSO 150-2:2013
Gulf Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013
Omani Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements
Recently Published
ISO 18990:2025
International Standard
Measurement of radioactivity in urine-238Pu, 239Pu and 240Pu — Test method using alpha spectrometry or ICP-MS
ISO 11929-3:2025
International Standard
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods
ISO 11929-2:2025
International Standard
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications
ISO 18243:2025
International Standard
Electrically propelled mopeds and motorcycles — Test specifications and safety requirements for lithium-ion battery systems