ISO 9846:2025

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٨ أغسطس ٢٠٢٥

Solar energy — Calibration of a pyranometer using a pyrheliometer

ملفات الوثيقة ISO 9846:2025

الإنجليزية 44 صفحات
الإصدار الحالي
85.04 OMR

مجال الوثيقة ISO 9846:2025

This document specifies calibration methods for a pyranometer using a pyrheliometer as a reference instrument. Three methods are specified in this document.

a)       Alternating sun and shade method. This method uses a shading disc to alternately shade and unshade a pyranometer to compare with the tracking pyrheliometer. The test pyranometer can be horizontal, on a fixed tilt or tracking alongside the pyrheliometer.

b)       Continuous sun and shade method. In this method, a shaded calibrated reference pyranometer is used in addition to the reference pyrheliometer. The test pyranometer can be horizontal, on a fixed tilt or tracking alongside the reference pyrheliometer, but the reference pyranometer must be mounted in the same plane as the test pyranometer (most often on the horizontal).

c)        Collimation tube method. In this method, the test pyranometer is mounted on a solar tracker and is equipped with a collimation tube designed to allow the test pyranometer to have the same geometric view as the reference pyrheliometer for a direct comparison of the two instruments.

The methods in this document are applicable for calibration of all pyranometers provided that a proper uncertainty evaluation is performed. Unlike spectrally flat pyranometers, non-spectrally flat pyranometers have a sensitivity that strongly depends on the solar spectrum. Therefore, the calibration result can be valid under a more limited range of conditions.

The result of a calibration is the instrument sensitivity accompanied by an uncertainty. This document includes suggestions for uncertainty evaluation.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 3953:2025
 
مواصفة قياسية دولية
Metallic powders — Determination of tap density
ISO 24108-1:2025
 
مواصفة قياسية دولية
Grid square statistics and their applications — Part 1: Fundamental principle of grid square statistics
ISO 23333:2025
 
مواصفة قياسية دولية
Natural gas — Upstream area — Requirements and testing of slick water
ISO 1008:2025
 
مواصفة قياسية دولية
Photography — Unprocessed photographic papers — Sheet dimensions