ISO 7972:2023
International Standard
Current Edition
·
Approved on
04 May 2023
Adhesives — Absorption of water into an adhesive layer using an open-faced specimen and determination of shear strength by secondary bonding
ISO 7972:2023 Files
English
10 Pages
Current Edition
OMR
31.45
ISO 7972:2023 Scope
This document specifies a method for the rapid permeation of water to an adhesive layer using a specimen with one side open, the secondary bonding of the specimens with the adhesive layer that is still moistened, and a shear strength test of the secondary bonded specimen, for the selection of water-resistant adhesives and the determination of suitable surface treatments. It does not assess the water resistance of the actual joint itself, as the distribution of water in the adhesive layer is different. This test procedure does not provide design information.
Best Sellers
GSO 150-2:2013
Gulf Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013
Omani Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements
Recently Published
ISO 18990:2025
International Standard
Measurement of radioactivity in urine-238Pu, 239Pu and 240Pu — Test method using alpha spectrometry or ICP-MS
ISO 11929-3:2025
International Standard
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods
ISO 11929-2:2025
International Standard
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications
ISO 18243:2025
International Standard
Electrically propelled mopeds and motorcycles — Test specifications and safety requirements for lithium-ion battery systems