ISO/ASTM 51900:2023

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٤ أبريل ٢٠٢٣

Guidance for dosimetry for radiation research

ملفات الوثيقة ISO/ASTM 51900:2023

الإنجليزية 9 صفحات
الإصدار الحالي
28.33 OMR

مجال الوثيقة ISO/ASTM 51900:2023

ISO 51900:2009 applies to the minimum requirements for dosimetry needed to conduct research on the effect of radiation on food and agricultural products. Such research includes establishment of the quantitative relationship between absorbed dose and the relevant effects in these products. ISO 51900:2009 also describes the overall requirement for dosimetry in such research, and in reporting of the results. It is necessary that dosimetry be considered as an integral part of the experiment.

ISO 51900:2009 applies to research conducted using the following types of ionizing radiation: gamma radiation, X-ray (bremsstrahlung), and electron beams. The purpose of ISO 51900:2009 is to ensure that the radiation source and experimental methodology are chosen such that the results of the experiment will be useful and understandable to other scientists and regulatory agencies.

ISO 51900:2009 describes dosimetry requirements for establishing the experimental method and for routine experiments; however, ISO 51900:2009 is not intended to limit the flexibility of the experimenter in the determination of the experimental methodology. ISO 51900:2009 includes tutorial information in the form of notes.

ISO 51900:2009 does not include dosimetry requirements for installation qualification or operational qualification of the irradiation facility.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 7718-2:2025
 
مواصفة قياسية دولية
Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors
ISO/IEC/IEEE 32430:2025
 
مواصفة قياسية دولية
Software engineering — Software non-functional size measurement
ISO 10218-1:2025
 
مواصفة قياسية دولية
Robotics — Safety requirements — Part 1: Industrial robots
ISO 10218-2:2025
 
مواصفة قياسية دولية
Robotics — Safety requirements — Part 2: Industrial robot applications and robot cells