ISO 24511:2024

International Standard   Current Edition · Approved on 19 February 2024

Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services

ISO 24511:2024 Files

English 57 Pages
Current Edition
OMR 97.01

ISO 24511:2024 Scope

This document provides guidelines for the management of wastewater utilities and the assessment of wastewater services.

This document is applicable to publicly and privately owned and operated wastewater utilities but does not favour any particular ownership or operational model.

NOTE 1        Wastewater is always generated when water is used or consumed. Accordingly, sources of wastewater can be residential, industrial, commercial or institutional. Collected storm water or (melted) snow can also be considered as wastewater, as it often carries contaminants and pathogens picked up from air or ground surfaces on its way to a collection system. In certain circumstances, especially in undeveloped areas, sanitary waste is collected in an undiluted form.

This document addresses wastewater systems in their entirety and is applicable to systems at any level of development (e.g. pit latrines, on-site systems, networks, treatment facilities).

The following are within the scope of this document:

     the definition of a language common to different stakeholders;

     objectives for the wastewater utility;

     guidelines for the management of wastewater utilities;

     service assessment criteria and related examples of performance indicators, all without setting any target values or thresholds.

The following are outside the scope of this document:

     methods of design and construction of wastewater systems;

     regulation of the management structure and the methodology of wastewater service activities of operation and management;

     regulation of the content of contracts or subcontracts;

     topics related to the systems inside buildings, between the point-of-discharge and the point-of-collection.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 9:2022
GSO 9:2022 
Omani Standard
Labeling of prepackaged food stuffs
GSO 9:2022
 
Gulf Technical Regulation
Labeling of prepackaged food stuffs

Recently Published

ISO 14855-2:2026
 
International Standard
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO/TR 5503:2026
 
International Standard
Preparation of steel substrates before application of paints and related products — Non-visible residues after surface preparation with single use abrasives — Relationship between conductivity (Bresle) measurements and surface soluble salt composition on panels blasted with single-use mineral abrasives
ISO 4683-3:2026
 
International Standard
Raw sheep skins — Part 3: Guidelines for grading on the basis of mass and size
ISO/IEC 25791-1:2026
 
International Standard
Information technology — OpenID Connect FAPI Security Profile 1.0 — Part 1: Baseline