ISO 24511:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٩ فبراير ٢٠٢٤

Activities relating to drinking water and wastewater services — Guidelines for the management of wastewater utilities and for the assessment of wastewater services

ملفات الوثيقة ISO 24511:2024

الإنجليزية 57 صفحات
الإصدار الحالي
OMR 97.01

مجال الوثيقة ISO 24511:2024

This document provides guidelines for the management of wastewater utilities and the assessment of wastewater services.

This document is applicable to publicly and privately owned and operated wastewater utilities but does not favour any particular ownership or operational model.

NOTE 1        Wastewater is always generated when water is used or consumed. Accordingly, sources of wastewater can be residential, industrial, commercial or institutional. Collected storm water or (melted) snow can also be considered as wastewater, as it often carries contaminants and pathogens picked up from air or ground surfaces on its way to a collection system. In certain circumstances, especially in undeveloped areas, sanitary waste is collected in an undiluted form.

This document addresses wastewater systems in their entirety and is applicable to systems at any level of development (e.g. pit latrines, on-site systems, networks, treatment facilities).

The following are within the scope of this document:

     the definition of a language common to different stakeholders;

     objectives for the wastewater utility;

     guidelines for the management of wastewater utilities;

     service assessment criteria and related examples of performance indicators, all without setting any target values or thresholds.

The following are outside the scope of this document:

     methods of design and construction of wastewater systems;

     regulation of the management structure and the methodology of wastewater service activities of operation and management;

     regulation of the content of contracts or subcontracts;

     topics related to the systems inside buildings, between the point-of-discharge and the point-of-collection.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 9:2022
GSO 9:2022 
مواصفة قياسية عمانية
بطاقات المواد الغذائية المعبأة
GSO 9:2022
 
لائحة فنية خليجية
بطاقات المواد الغذائية المعبأة

اعتمدت مؤخراً

ISO 14855-2:2026
 
مواصفة قياسية دولية
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions — Method by analysis of evolved carbon dioxide — Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO/TR 5503:2026
 
مواصفة قياسية دولية
Preparation of steel substrates before application of paints and related products — Non-visible residues after surface preparation with single use abrasives — Relationship between conductivity (Bresle) measurements and surface soluble salt composition on panels blasted with single-use mineral abrasives
ISO 4683-3:2026
 
مواصفة قياسية دولية
Raw sheep skins — Part 3: Guidelines for grading on the basis of mass and size
ISO/IEC 25791-1:2026
 
مواصفة قياسية دولية
Information technology — OpenID Connect FAPI Security Profile 1.0 — Part 1: Baseline