ISO 23793-1:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٢ يوليو ٢٠٢٤

Intelligent transport systems — Minimal risk manoeuvre (MRM) for automated driving — Part 1: Framework, straight-stop and in-lane stop

ملفات الوثيقة ISO 23793-1:2024

الإنجليزية 15 صفحات
الإصدار الحالي
47.04 OMR

مجال الوثيقة ISO 23793-1:2024

This document addresses the minimum requirements for minimal risk manoeuvres (MRM), which are the response of an ADS to perform automated fallback to reach a minimal risk condition (MRC).

This document specifies the classification framework for MRMs. The classification framework establishes the concept of MRM operation, classification of different MRM types, and basic principles of the decision-making process to decide which MRM type can be performed based on the situation.

This document also specifies the minimum requirements of the control strategy and test procedures for the two simplest types of MRM: straight stop for type 1 and in-lane stop for type 2.

The scope of the MRM described in this document covers minimum requirements for ADS performance during MRM action, from initiation to termination, aimed at achieving an MRC. MRM action-specific safety requirements for robust system design, such as those specified in ISO 26262 and ISO 21448, are not within the scope of this document.

The MRM described in this document are intended to be used on light-duty vehicles equipped with Level 3-5 ADS.

The scope does not include methods for detecting ADS failures and the decision-making process to initiate an MRM. This is because there are numerous cases that can initiate MRMs, and there is no general agreement on classification of those cases in the industry.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 20589:2025
 
مواصفة قياسية دولية
Glass in building — Determination of the emissivity
ISO 11265:2025
 
مواصفة قياسية دولية
Environmental solid matrices — Determination of the specific electrical conductivity
ISO 11465:2025
 
مواصفة قياسية دولية
Sludge and solid environmental matrices — Determination of dry residue or water content and calculation of the dry matter fraction on a mass basis
ISO 9350:2025
 
مواصفة قياسية دولية
Corrosion of metals and alloys — Testing method of corrosion resistance for hafnium at high temperature and pressure