ISO/TS 20065:2022

International Standard   Current Edition · Approved on 19 December 2022

Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method

ISO/TS 20065:2022 Files

English 33 Pages
Current Edition
OMR 74.97

ISO/TS 20065:2022 Scope

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015 
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 18990:2025
 
International Standard
Measurement of radioactivity in urine-238Pu, 239Pu and 240Pu — Test method using alpha spectrometry or ICP-MS
ISO 11929-3:2025
 
International Standard
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods
ISO 11929-2:2025
 
International Standard
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications
ISO 18243:2025
 
International Standard
Electrically propelled mopeds and motorcycles — Test specifications and safety requirements for lithium-ion battery systems