ISO/TS 20065:2022

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ١٩ ديسمبر ٢٠٢٢

Acoustics — Objective method for assessing the audibility of tones in noise — Engineering method

ملفات الوثيقة ISO/TS 20065:2022

الإنجليزية 33 صفحات
الإصدار الحالي
74.7 OMR

مجال الوثيقة ISO/TS 20065:2022

This document describes a method for the objective determination of the audibility of tones in environmental noise.

This document is intended to augment the usual method for evaluation on the basis of aural impression, in particular, in cases in which there is no agreement on the degree of the audibility of tones. The method described can be used if the frequency of the tone being evaluated is equal to, or greater than, 50 Hz. In other cases, if the tone frequency is below 50 Hz, or if other types of noise (such as screeching) are captured, then this method cannot replace subjective evaluation.

NOTE      The procedure has not been validated below 50 Hz.

The method presented herein can be used in continuous measurement stations that work automatically.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/IEC TR 21221:2025
 
مواصفة قياسية دولية
Information technology — Artificial intelligence — Beneficial AI systems
ISO 7730:2025
 
مواصفة قياسية دولية
Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria
ISO 8000-220:2025
 
مواصفة قياسية دولية
Data quality — Part 220: Sensor data: Quality measurement
ISO 22412:2025
 
مواصفة قياسية دولية
Particle size analysis — Dynamic light scattering (DLS)