ISO 8133:2022

مواصفة قياسية دولية   الإصدار الحالي
· اعتمدت بتاريخ 01 يونيو 2022 ·

Hydraulic fluid power — Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series

ملفات الوثيقة ISO 8133:2022

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 8133:2022

This document specifies the mounting dimensions required for interchangeability of accessories for 16 MPa (160 bar) compact cylinders conforming to ISO 6020‑2. The accessories have been designed specifically for use with cylinders manufactured in accordance with ISO 6020‑2, but this does not limit their application[1].

This document covers the following accessories, identified in accordance with ISO 6099:

—    AP6 — rod eye spherical, female thread (see Figure 1 and Table 1);

—    AB5 — clevis bracket, spherical eye, in angle (see Figure 2 and Table 2);

—    AA6-L — pivot pin, spherical bearing, locking plate (see Figure 3 and Table 3);

—    AL6 — locking plate for pivot pin (see Figure 4 and Table 4);

—    AP2 — rod clevis, female thread (see Figure 5 and Table 5);

—    AP4 — rod eye plain, female thread (see Figure 6 and Table 6);

—    AB2 — eye bracket (see Figure 7 and Table 7);

—    AB4 — clevis bracket, straight (see Figure 8 and Table 8);

—    AA4-S — pivot pin, plain (split pins) (see Figure 9 and Table 9);

—    AA4-R — pivot pin, plain (rings) (see Figure 10 and Table 10);

—    AT4 — trunnion bracket (see Figure 11 and Table 11).

These accessories are used on hydraulic cylinders for mechanically transmitting the cylinder force. The design of these accessories is based on the maximum forces resulting from the specified internal diameters of the cylinders and pressures according to ISO 3320 and ISO 2944.

This document only applies to the dimensional criteria of products manufactured in conformity with this document; it does not apply to their functional characteristics.

 

[1]   1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/PAS 8329:2024
 
مواصفة قياسية دولية
Extended master connection file (χMCF) — Description of mechanical connections and joints in structural systems
IWA 45:2024
 
مواصفة قياسية دولية
Sustainable critical mineral supply chains
ISO/TS 5462:2024
 
مواصفة قياسية دولية
Rubber latex coated fabric gloves — Specification
ISO 19085-9:2024
 
مواصفة قياسية دولية
Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table)