ISO 4437-5:2024

International Standard   Current Edition
· Approved on 14 February 2024 ·

Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) — Part 5: Fitness for purpose of the system

Petroleum products and natural gas handling equipment
Including petroleum and natural gas storage devices, distribution systems, pipelines, petrol stations, dispensing devices, etc.

ISO 4437-5:2024 Files

null Pages
Current Edition

ISO 4437-5:2024 Scope

This document specifies the requirements of fitness for purpose of assembled polyethylene (PE) piping systems in the field of the supply of gaseous fuels.

It specifies the requirements for electrofusion, socket fusion, butt fusion and mechanical joints.

It specifies the method of preparation of test piece joints and the tests to be carried out on these joints for assessing the fitness for purpose of the system under normal and extreme conditions.

It specifies the test parameters for the test methods referred to in this document.

This document is intended to be used only by the product manufacturer and test laboratories to assess the performance of components in accordance with ISO 4437-2, ISO 4437-3 and ISO 4437-4 when joined together under normal and extreme conditions in accordance with this document. It is not intended for on-site testing of pipe systems.

In conjunction with ISO 4437-1, ISO 4437-2, ISO 4437-3 and ISO 4437-4, this document is applicable to PE pipes, fittings and valves, their joints, and joints with components of PE and other materials intended to be used under the following conditions:

a)       a maximum operating pressure (MOP), up to and including 10 bar[1], at a reference temperature of 20 °C for design purposes;

b)       an operating temperature between −20 °C and 40 °C.

For operating temperatures between 20 °C and 40 °C, derating coefficients are defined in Annex A.

The ISO 4437 series covers a range of MOPs and gives requirements concerning colours.

[1]  1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-1:2013
GSO 150-1:2013 
Omani Standard
Expiration dates for food products -Part 1 : Mandatory expiration dates
GSO 150-1:2013
 
Gulf Technical Regulation
Expiration dates for food products -Part 1 : Mandatory expiration dates

Recently Published

ISO/IEC 14763-3:2024
 
International Standard
Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling
ISO 12625-5:2024
 
International Standard
Tissue paper and tissue products — Part 5: Determination of wet tensile strength
ISO 11772:2024
 
International Standard
Hot-rolled longitudinally profiled steel plate
ISO 24146-1:2024
 
International Standard
Ships and marine technology — Shipboard waste on inland navigation vessels — Part 1: On board management and handling