ISO 24664:2024

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٢٩ نوفمبر ٢٠٢٤

Refrigerating systems and heat pumps — Pressure relief devices and their associated piping — Methods for calculation

ملفات الوثيقة ISO 24664:2024

الإنجليزية 35 صفحات
الإصدار الحالي
65.25 OMR

مجال الوثيقة ISO 24664:2024

This document describes the calculation of:

     mass flow for sizing pressure relief devices for parts of refrigerating systems;

     discharge capacities for pressure relief valves and other pressure relief devices in refrigerating systems including the necessary data for sizing these when relieving to atmosphere or to part of the refrigerating system at lower pressure;

     the pressure loss in the inlet and outlet lines of pressure relief valves and other pressure relief devices and includes the necessary data.

This document specifies the requirements for selection of pressure relief devices to prevent excessive pressure due to internal and external heat sources, the sources of increasing pressure (e.g. compressor, heaters, etc.) and thermal expansion of trapped liquid.

NOTE            The term "refrigerating system" used in this document includes heat pumps.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 2055-1:2015
GSO 2055-1:2015 
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO/ASTM TS 52949:2025
 
مواصفة قياسية دولية
Additive manufacturing of metals — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-EB equipment
ISO/TS 7815-2:2025
 
مواصفة قياسية دولية
Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 2: Specification of the secure vehicle interface
ISO 3506-4:2025
 
مواصفة قياسية دولية
Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws with specified grades and hardness classes
ISO 5700:2025
 
مواصفة قياسية دولية
Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions