ISO 24212:2024

International Standard   Current Edition · Approved on 20 September 2024

Remediation techniques applied at contaminated sites

ISO 24212:2024 Files

English 99 Pages
Current Edition
106.98 OMR

ISO 24212:2024 Scope

This document provides requirements and guidance on key aspects of remediation techniques. It describes the principles, main characteristics, advantages and limitations to be considered in the selection within an option appraisal of individual or combinations of in situ and on-site remediation techniques, including:

     the type of contaminants to be dealt with;

     current and/or intended site use;

     local legal, policy, socio-economic and environmental contexts.

This document is applicable to the remediation of contaminated sites, i.e. where soil, or soil gas, ambient air or groundwater are contaminated. It identifies which phase/matrix can be targeted by a technique, e.g. fluid (groundwater, gas, non-aqueous phase liquid) or solid, and which contaminant it can applied to. This document also provides information on hazards that can be associated with the implementation of remediation.

This document does not provide:

     an exhaustive list of remediation techniques;

     guidance on sites contaminated with radioactive substances, pathogenic or infectious agents, or “pyrotechnic devices” (e.g. unexploded ordnances);

     guidance on ex situ techniques that are set up off-site;

     a framework that covers all individual situations, or prescribes which technique(s) to use in a specific context.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015 
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 6683:2025
 
International Standard
Earth-moving machinery — Seat-belt assemblies and seat-belt anchorages — Performance requirements and tests
ISO 6578:2025
 
International Standard
Refrigerated hydrocarbon liquids — Static measurement — Calculation procedure
ISO 16321-4:2025
 
International Standard
Eye and face protection — Part 4: Protection against biological hazards
ISO 3377-2:2025
 
International Standard
Leather — Physical and mechanical tests — Part 2: Determination of double edge tear load