ISO 13885-2:2020

International Standard   Current Edition · Approved on 08 July 2020

Gel permeation chromatography (GPC) — Part 2: N,N-Dimenthylacetamide (DMAC) as eluent

ISO 13885-2:2020 Files

English 24 Pages
Current Edition
OMR 63.23

ISO 13885-2:2020 Scope

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in DMAC (N,N-Dimethylacetamide) by gel permeation chromatography (GPC).

NOTE Also known as size exclusion chromatography (SEC).

Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.

The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).

This document includes no correction method (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 9:2022
GSO 9:2022 
Omani Standard
Labeling of prepackaged food stuffs
GSO 9:2022
 
Gulf Technical Regulation
Labeling of prepackaged food stuffs

Recently Published

ISO 18615-1:2026
 
International Standard
Traditional Chinese medicine — Electric radial pulse tonometric devices — Part 1: General requirements
ISO 21388-1:2026
 
International Standard
Acoustics — Hearing aid fitting management (HAFM) — Part 1: General process
ISO 20915:2026
 
International Standard
Life cycle inventory calculation methodology for steel products
ISO 11607-3:2026
 
International Standard
Packaging for terminally sterilized medical devices — Part 3: Requirements for process development for forming, sealing and assembly