ISO 21622-3:2024

International Standard   Current Edition · Approved on 07 March 2024

Irrigation techniques — Remote monitoring and control for irrigation — Part 3: Interoperability

ISO 21622-3:2024 Files

English 371 Pages
Current Edition
93.82 OMR

ISO 21622-3:2024 Scope

This document establishes requirements for interoperability among systems developed for management and/or control of irrigation facilities. It can be applied under any technological platform and irrigation system, regardless of the water management scheme, with the exception of irrigation mobile machinery, including centre pivots and linear irrigation machines. Due to the dynamic nature of these machines, associated control systems and specific safety requirements, the applicability of exchangeable data for irrigation mechanical move systems was not fully determined at the time of this publication.

This document does not define hardware or software requirements for any of the systems to which it applies. It only concerns externally visible interfaces and places no restriction on the underlying implementations. It has been designed to avoid interference with proprietary solutions subjected to intellectual property. From the point of view of the data exchange, and to guarantee interoperability based on the previous premises, this document defines three communication interfaces (interface with management, interface with events and interface with subsystems) and the architecture to which these interfaces apply. Three levels of architecture has been defined to accommodate these interfaces:

    The Management Level, where any MIS conforming with this document is located. Out of all available data exchange methods, each MIS only implements those required to execute its functionalities.

    The Higher Control Level: coordination. At this level is performed the data integration among RMCS and the access control to it. A software element, called coordination broker, ensures this integration and allows the use of different technologies in its interfaces.

    The Lower Control Level: RMCS. These can also be referred to as irrigation subsystems. The RMCS perform the duties of the irrigation entity(s) under its control.

A coordination broker can be developed as a product by any of these manufacturers or by an independent developer using the standard specifications for this kind of software.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015 
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 20236:2024
 
International Standard
Water quality — Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion
ISO 21474-3:2024
 
International Standard
In vitro diagnostic medical devices — Multiplex molecular testing for nucleic acids — Part 3: Interpretation and reports
ISO 20957-1:2024
 
International Standard
Stationary training equipment — Part 1: General safety requirements and test methods
ISO 19397:2024
 
International Standard
Paints and varnishes — Determination of the film thickness of coatings using an ultrasonic gauge