ISO 23749:2022
International Standard
Current Edition
·
Approved on
12 April 2022
·
Microbeam analysis — Electron backscatter diffraction — Quantitative determination of austenite in steel
ISO 23749:2022 Files
null Pages
Current Edition
ISO 23749:2022 Scope
This document specifies procedures for quantitative analysis of austenite in steel using electron backscatter diffraction (EBSD). This document is mainly applied in low and medium carbon steels, low and medium carbon alloy steels.
This document is used to analyse austenite with grain size larger than 50 nm. This method is not used to quantify austenite with grain size smaller than 50 nm, which can significantly affect the accuracy of the analysis results.
NOTE 1 The size limit is strongly dependent both on the instrument and the instrument operating parameters.
NOTE 2 The size limit is the minimum grain size of the detectable austenite.
Best Sellers
GSO 150-2:2013
Gulf Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
OS GSO 150-2:2013
GSO 150-2:2013
Omani Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
![OS Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_os_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
OS GSO 2055-1:2015
GSO 2055-1:2015
Omani Standard
HALAL FOOD - Part 1 : General Requirements
![OS Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_os_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2055-1:2015
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published
ISO/PAS 8329:2024
International Standard
Extended master connection file (χMCF) — Description of mechanical connections and joints in structural systems
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
IWA 45:2024
International Standard
Sustainable critical mineral supply chains
ISO/TS 5462:2024
International Standard
Rubber latex coated fabric gloves — Specification
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
ISO 19085-9:2024
International Standard
Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)