ISO 8140:2018
International Standard
Current Edition
·
Approved on
21 September 2018
·
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end clevises
ISO 8140:2018 Files
English
4 Pages
Current Edition
19.17 OMR
ISO 8140:2018 Scope
This document specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1 000 kPa [10 bar1] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application.
The clevises are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force. The design of the clevises is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287.
1 1 bar = 100 kPa = 105 Pa; 1 Pa = 1 N/m2.
Best Sellers
GSO 150-2:2013
Gulf Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
OS GSO 150-2:2013
GSO 150-2:2013
Omani Standard
Expiration dates for food products - Part 2 :
Voluntary expiration dates
![OS Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_os_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
OS GSO 2055-1:2015
GSO 2055-1:2015
Omani Standard
HALAL FOOD - Part 1 : General Requirements
![OS Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_os_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 2055-1:2015
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published
ISO/PAS 8329:2024
International Standard
Extended master connection file (χMCF) — Description of mechanical connections and joints in structural systems
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
IWA 45:2024
International Standard
Sustainable critical mineral supply chains
ISO/TS 5462:2024
International Standard
Rubber latex coated fabric gloves — Specification
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
ISO 19085-9:2024
International Standard
Woodworking machines — Safety — Part 9: Circular saw benches (with and without sliding table)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)