ISO 8140:2018
مواصفة قياسية دولية
الإصدار الحالي
·
اعتمدت بتاريخ
٢١ سبتمبر ٢٠١٨
Pneumatic fluid power — Cylinders, 1 000 kPa (10 bar) series — Mounting dimensions of rod-end clevises
ملفات الوثيقة ISO 8140:2018
الإنجليزية
4 صفحات
الإصدار الحالي
20.12 OMR
مجال الوثيقة ISO 8140:2018
This document specifies the mounting dimensions required for interchangeability of rod-end clevises of pneumatic cylinders. The rod-end clevises have been designed specifically for use with 1 000 kPa [10 bar1] series cylinders manufactured in accordance with ISO 6432 and ISO 15552, but this does not limit their application.
The clevises are used on piston rods of pneumatic cylinders for mechanically transmitting the cylinder force. The design of the clevises is based on the maximum forces resulting from the specified internal diameter of the cylinders and pressure according to ISO 6432, ISO 15552 and ISO 21287.
1 1 bar = 100 kPa = 105 Pa; 1 Pa = 1 N/m2.
الأكثر مبيعاً
GSO 150-2:2013
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني :
فترات الصلاحية الاختيارية

OS GSO 150-2:2013
GSO 150-2:2013
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني :
فترات الصلاحية الاختيارية


OS GSO 2055-1:2015
GSO 2055-1:2015
مواصفة قياسية عمانية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال


GSO 2055-1:2015
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً
ISO 7718-2:2025
مواصفة قياسية دولية
Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 2: Upper deck doors

ISO/IEC/IEEE 32430:2025
مواصفة قياسية دولية
Software engineering — Software non-functional size measurement



ISO 10218-1:2025
مواصفة قياسية دولية
Robotics — Safety requirements — Part 1: Industrial robots

ISO 10218-2:2025
مواصفة قياسية دولية
Robotics — Safety requirements — Part 2: Industrial robot applications and robot cells
