ISO 19880-1:2020

International Standard   Current Edition
· Approved on 04 March 2020 ·

Gaseous hydrogen — Fuelling stations — Part 1: General requirements

Gases for industrial application
Including compressed air and hydrogen

ISO 19880-1:2020 Files

English 173 Pages
Current Edition
98.6 OMR

ISO 19880-1:2020 Scope

This document defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles).

This document is not applicable to the dispensing of cryogenic hydrogen, or hydrogen to metal hydride applications.

Since this document is intended to provide minimum requirements for fuelling stations, manufacturers can take additional safety precautions as determined by a risk management methodology to address potential safety risks of specific designs and applications.

While this document is targeted for the fuelling of light duty hydrogen road vehicles, requirements and guidance for fuelling medium and heavy duty road vehicles (e.g. buses, trucks) are also covered.

Many of the generic requirements within this document are applicable to fuelling stations for other hydrogen applications, including but not limited to the following:

— fuelling stations for motorcycles, fork-lift trucks, trams, trains, fluvial and marine applications;

— fuelling stations with indoor dispensing;

— residential applications to fuel land vehicles;

— mobile fuelling stations; and

— non-public demonstration fuelling stations.

However, further specific requirements that can be necessary for the safe operation of such fuelling stations are not addressed in this document.

This document provides requirements for and guidance on the following elements of a fuelling station (see Figure 1 and Figure 2):

— hydrogen production/delivery system:

  • — delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydride storage trailers;
  • — on-site hydrogen generators using water electrolysis process or hydrogen generators using fuel processing technologies;
  • — liquid hydrogen storage;
  • — hydrogen purification systems, as applicable;

— compression:

  • — gaseous hydrogen compression;
  • — pumps and vaporizers;

— gaseous hydrogen buffer storage;

— pre-cooling device;

— gaseous hydrogen dispensing systems.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015 
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 9658:2024
 
International Standard
Steel — Determination of aluminium content — Flame atomic absorption spectrometric method
ISO 23936-4:2024
 
International Standard
Oil and gas industries including lower carbon energy — Non-metallic materials in contact with media related to oil and gas production — Part 4: Fiber-reinforced composite materials
ISO/IEC 8506:2024
 
International Standard
Information technology — Automatic identification and data capture technology — AIDC application in industrial construction
ISO 544:2024
 
International Standard
Welding consumables — Technical delivery conditions for filler materials and fluxes — Type of product, dimensions, tolerances and markings