ISO 16321-1:2021

مواصفة قياسية دولية   الإصدار الحالي
اعتمدت بتاريخ  02 مارس 2021

Eye and face protection for occupational use — Part 1: General requirements

أجهزة وقاية الرأس
* تشمل خوذة الرأس، حماية العينين والأذنين ، الخ

ملفات الوثيقة ISO 16321-1:2021

null صفحات
الإصدار الحالي

مجال الوثيقة ISO 16321-1:2021

This document specifies general requirements for eye and face protectors. These protectors are intended to provide protection for the eyes and faces of persons against one or more common occupational hazards such as impacts from flying particles and fragments, optical radiation, dusts, splashing liquids, molten metals, heat, flame, hot solids, harmful gases, vapours and aerosols.

Additional requirements for eye and face protectors used during welding and related techniques and for mesh protectors are given in ISO 16321-2 and ISO 16321-3, respectively.

This document applies to:

— all plano as well as corrective and prescription lensed protectors and components;

— those eye and face protectors used for occupational-type tasks that are performed similarly to an occupation, e.g. "do-it-yourself";

— those eye and face protectors used in educational establishments.

This document does not apply to:

— protectors specifically intended for protection against only solar radiation and used in non- occupational environments for which the ISO 12312 series applies;

— protectors for medically prescribed applications (not occupational), e.g. eye protection for severe dry eye, tints prescribed for medical conditions;

— patient eye protectors during diagnosis or treatment (e.g. ISO/TR 22463);

— protectors for use during medical or e.g. aesthetic applications, e.g. intense light sources (ILS) for which the ISO 12609 series applies;

— protectors specifically intended for sports for which the ISO 18527 series applies;

— laser protectors;

— face protectors intended for live-working to protect against short-circuit electric arcs for which IEC 62819 applies;

— protectors intended to protect against ionizing radiation, e.g. X-rays, for which IEC 61331-3 applies.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-2:2013
GSO 150-2:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
OS GSO 150-1:2013
GSO 150-1:2013 
مواصفة قياسية عمانية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
 
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية

اعتمدت مؤخراً

ISO 3262-13:2023
 
مواصفة قياسية دولية
Extenders — Specifications and methods of test — Part 13: Natural quartz (ground)
ISO 17386:2023
 
مواصفة قياسية دولية
Intelligent transport systems — Manoeuvring aids for low-speed operation (MALSO) — Performance requirements and test procedures
ISO 22932-4:2023
 
مواصفة قياسية دولية
Mining — Vocabulary — Part 4: Prospecting and exploration
ISO/TS 32003:2023
 
مواصفة قياسية دولية
Document management — Portable Document Format — Adding support of AES-GCM in PDF 2.0