ISO 23555-1:2022

International Standard   Current Edition · Approved on 11 January 2022

Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa — Part 1: General requirements

ISO 23555-1:2022 Files

English 70 Pages
Current Edition
94.56 OMR

ISO 23555-1:2022 Scope

This document specifies generic safety, constructional, performance, testing and documentation requirements for high pressure controls for use in gas transmission, distribution and installations (hereafter referred to as controls).

This document is applicable to controls with operating pressures greater than 500 kPa (5 bar) and up to and including 10 MPa (100 bar) and nominal size up to DN 400 for use with fuel gases as natural gas, manufactured gas, biomethane or liquefied petroleum gas (LPG) in commercial, industrial installations, including fuel gas infrastructures.

The test methods given in this document are intended for product type test, routine tests and batch surveillance tests.

This document is not applicable to:

—    controls upstream from/on/in domestic gas-consuming appliances which are installed downstream of domestic gas meters;

—    controls designed with declared maximum capacity ≤200 m3/h (normal conditions) and declared maximum inlet pressure ≤500 kPa (5 bar), to be incorporated into pressure control systems used in service lines (pipework from the main pipework in a gas infrastructure to the point of delivery of the gas);

—    industrial process control valves, such as IEC 60534;

—    controls used in aggressive/sour gas environments (gas environments containing water and H2S are considered sour) or severely corrosive conditions;

—    controls in service conditions with renewables (e.g. H2NG with hydrogen more than 10 %) and/or waste gases (e.g. biogas, etc.), if additional information is not provided (e.g. contaminant, liquid, etc.).

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015 
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 13909-8:2025
 
International Standard
Coal and coke — Mechanical sampling — Part 8: Methods of testing for bias
ISO/IEC 16466:2025
 
International Standard
Information technology — 3D printing and scanning — Assessment methods of 3D scanned data use in 3D printing
ISO 18960:2025
 
International Standard
Security controls and implementation for third party payment service providers — Guidance and requirements
ISO 5684:2025
 
International Standard
Adhesives — Floor covering adhesives and products for flooring installation — Assessment and classification of low volatile organic compound (VOC) products