ISO 13641-1:2003

International Standard   Current Edition · Approved on 26 May 2003

Water quality — Determination of inhibition of gas production of anaerobic bacteria — Part 1: General test

ISO 13641-1:2003 Files

English 14 Pages
Current Edition
47.2 OMR

ISO 13641-1:2003 Scope

ISO 13641-1:2003 specifies a screening method for assessing the potential toxicity of substances, mixtures, surface waters, groundwaters and wastewaters, effluents, sludges or other environmental samples by determining the production of biogas (carbon dioxide and methane) from the anaerobic digestion of sewage sludge over periods of up to 3 days. The growth rate of anaerobic bacteria is much lower compared with that of aerobic microorganisms. For this reason, the test periods are longer for anaerobic methods than those used for aerobic bacteria.

This method is applicable to substances, soluble or insoluble in water, including volatile chemicals.

Note that special care is necessary with compounds of low water-solubility, and in these cases, other methods might be more suitable.

This method can provide information that is useful in predicting the likely effect of a test material on biogas production in anaerobic digesters. For example, only longer tests, which simulate working digesters more closely can indicate whether adaptation of the microorganisms to the test material can occur or whether compounds likely to be adsorbed onto sludge can build up to a toxic concentration over a longer period than allowed in this test.

Information obtained by ISO 13641-1:2003 can also be helpful in choosing suitable initial mass concentrations for anaerobic biodegradability tests (e.g. ISO 11734). However, ISO 13641-1:2003 using undiluted sludge is less suitable for testing dilute digesting sludge than the method described in ISO 13641-2 where the mass concentrations are a hundredfold more dilute.

Best Sellers

GSO 150-2:2013
 
Gulf Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 150-2:2013
GSO 150-2:2013 
Omani Standard
Expiration dates for food products - Part 2 : Voluntary expiration dates
OS GSO 2055-1:2015
GSO 2055-1:2015 
Omani Standard
HALAL FOOD - Part 1 : General Requirements
GSO 2055-1:2015
 
Gulf Technical Regulation
HALAL FOOD - Part 1 : General Requirements

Recently Published

ISO 19970:2025
 
International Standard
Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Metering of gas as fuel on LNG carriers during cargo transfer operations
ISO 3664:2025
 
International Standard
Graphic technology and photography — Viewing conditions
ISO/IEC 14496-10:2025
 
International Standard
Information technology — Coding of audio-visual objects — Part 10: Advanced video coding
ISO 19361:2025
 
International Standard
Measurement of radioactivity — Determination of beta emitters activities — Test method using liquid scintillation counting