GSO ASTM A666/A666M:2025
ASTM A666/A666M:24
Gulf Standard
Current Edition
·
Approved on
14 October 2025
Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
GSO ASTM A666/A666M:2025 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO ASTM A666/A666M:2025 Scope
This specification covers austenitic stainless steels in the annealed and normally required cold-worked conditions. They shall be formed in different shapes such as sheets, strips, plates and flat bars. The steels shall adhere to specified chemical composition requirements. Mechanical properties such as yield strength, tensile strength, elongation, hardness, and bending shall be determined. The specimens shall be subjected to tension test, free-bend test, and controlled-bend or V-block test.
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
OS GSO 1431:2002
GSO 1431:2002
Omani Standard
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
OS GSO 1427:2008
GSO 1427:2008
Omani Standard
Ceramic Sanitary Appliances - Western Water Closets
Recently Published from Construction and Building Sector
GSO 113:1989
Gulf Standard
TECHNICAL TERMS AND DEFINITIONS USED
IN SPINNING AND WEAVING INDUSTRY
PART 2: FABRIC DEFECTS
OS GSO 113:1989
GSO 113:1989
Omani Standard
TECHNICAL TERMS AND DEFINITIONS USED
IN SPINNING AND WEAVING INDUSTRY
PART 2: FABRIC DEFECTS
OS GSO ISO/TR 52016-4:2025
ISO/TR 52016-4:2024
Omani Standard
Energy performance of buildings — Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads — Part 4: Explanation and justification of ISO 52016-3
OS GSO ISO 18566-6:2025
ISO 18566-6:2019
Omani Standard
Building environment design — Design, test methods and control of hydronic radiant heating and cooling panel systems — Part 6: Input parameters for the energy calculation