GSO ASTM C216:2025
ASTM C216:24
Gulf Standard
Current Edition
·
Approved on
14 October 2025
Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
GSO ASTM C216:2025 Files
No files for this standard are available in the store currently.
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO ASTM C216:2025 Scope
This specification covers brick intended for use in masonry and supplying structural or facing components, or both, to the structure. Bricks shall be classified according to their resistance to damage by freezing when saturated at a moisture content: Grade SW and Grade MW. The facing bricks shall be classified into three types: Types FBS; FBX; and FBA. Durability; absorption alternate; freezing and thawing alternative; breakage and weight loss; cracking; low weathering index alternative; compressive strength; and initial rate of absorption requirements shall be tested for the material to meet the specified requirements.
Best Sellers From Construction and Building Sector
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 2489:2015
Gulf Standard
Specifications of Recycled Aggregates from Construction
Waste to be used in construction Works
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
Recently Published from Construction and Building Sector
OS GSO EN 13888-1:2026
EN 13888-1:2022
Omani Standard
Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
OS GSO ASTM E2921:2026
ASTM E2921:25
Omani Standard
Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems
OS GSO ISO 16000-33:2026
ISO 16000-33:2024
Omani Standard
Indoor air — Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS)
OS GSO ISO 18393-1:2026
ISO 18393-1:2023
Omani Standard
Thermal insulation products — Determination of settlement — Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling