GSO ISO 19880-1:2025

ISO 19880-1:2020
Gulf Standard   Current Edition · Approved on 14 October 2025

Gaseous hydrogen — Fuelling stations — Part 1: General requirements

GSO ISO 19880-1:2025 Files

English 173 Pages
Current Edition Reference Language

GSO ISO 19880-1:2025 Scope

This document defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles).

This document is not applicable to the dispensing of cryogenic hydrogen, or hydrogen to metal hydride applications.

Since this document is intended to provide minimum requirements for fuelling stations, manufacturers can take additional safety precautions as determined by a risk management methodology to address potential safety risks of specific designs and applications.

While this document is targeted for the fuelling of light duty hydrogen road vehicles, requirements and guidance for fuelling medium and heavy duty road vehicles (e.g. buses, trucks) are also covered.

Many of the generic requirements within this document are applicable to fuelling stations for other hydrogen applications, including but not limited to the following:

— fuelling stations for motorcycles, fork-lift trucks, trams, trains, fluvial and marine applications;

— fuelling stations with indoor dispensing;

— residential applications to fuel land vehicles;

— mobile fuelling stations; and

— non-public demonstration fuelling stations.

However, further specific requirements that can be necessary for the safe operation of such fuelling stations are not addressed in this document.

This document provides requirements for and guidance on the following elements of a fuelling station (see Figure 1 and Figure 2):

— hydrogen production/delivery system:

  • — delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydride storage trailers;
  • — on-site hydrogen generators using water electrolysis process or hydrogen generators using fuel processing technologies;
  • — liquid hydrogen storage;
  • — hydrogen purification systems, as applicable;

— compression:

  • — gaseous hydrogen compression;
  • — pumps and vaporizers;

— gaseous hydrogen buffer storage;

— pre-cooling device;

— gaseous hydrogen dispensing systems.

Best Sellers From Oil and Gas Sector

OS GSO 672:2010
GSO 672:2010 
Omani Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 672:2010
 
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 1161:2021
 
Gulf Standard
HLP HYDRAULIC OILS
OS GSO 1785-1:2024
GSO 1785-1:2024 
Omani Standard
Lubricating Oils for Internal Combustion Engines – Part 1: API Classifications of Lubricating Oils for Gasoline and Diesel Engines

Recently Published from Oil and Gas Sector

GSO ISO 5661:1994
ISO 5661:1983 
Gulf Standard
Petroleum products -- Hydrocarbon liquids -- Determination of refractive index
OS GSO ISO 5661:1994
ISO 5661:1983 
Omani Standard
Petroleum products -- Hydrocarbon liquids -- Determination of refractive index
GSO ISO 2615:2025
ISO 2615:2024 
Gulf Standard
Analysis of natural gas —Biomethane — Determination of the content of compressor oil
GSO ISO 14313:2025
ISO 14313:2025 
Gulf Standard
Oil and gas industries including lower carbon energy — Pipeline transportation systems — Pipeline valves