GSO ECE R 168:2025

ECE R 168:2024
Gulf Standard   Current Edition · Approved on 14 October 2025

Uniform Provisions Concerning the Approval of light duty passenger and commercial vehicles with regards to real driving emissions (RDE)

GSO ECE R 168:2025 Files

GSO ECE R 168:2025 Scope

This Regulation aims at providing a worldwide harmonized method to determine the levels of Real Driving Emissions (RDE) of gaseous compounds and particles from light-duty vehicles. This Regulation applies to the type approval of vehicles of categories M1 with a reference mass not exceeding 2,610 kg and vehicles of categories M2 and N1 with a reference mass not exceeding 2,610 kg and a technical permissible maximum laden mass not exceeding 3,500 kg with regard to their Real Driving Emissions. At the manufacturer's request, type approval granted under this Regulation may be extended from vehicles mentioned above to vehicles of categories M1 with a reference mass not exceeding 2,840 kg and vehicles of categories M2 and N1 with a reference mass not exceeding 2,840 kg and a technical permissible maximum laden mass not exceeding 3,500 kg and which meet the conditions laid down in this Regulation. Pure Electric Vehicles and Fuel Cell Vehicles are out of the scope of this Regulation.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO 230:2005
 
Gulf Standard
MOTOR VEHICLES — BRAKE FLUID – SIMULATED SERVICE PERFORMANCE TEST
GSO 1796:2007
 
Gulf Standard
Methods of test for two pieces aluminum round cans used for canning food (Beverages & stuffs
OS GSO 1589:2002
GSO 1589:2002 
Omani Standard
Air ducts for air conditions-part1: definitions,classification and terminology .
OS GSO ISO 4548-3:2002
ISO 4548-3:1997 
Omani Standard
METHODS OF TEST FOR FULL-FLOW LUBRICATING OIL FILTERS FOR INTERNAL COMBUSTION ENGINES - PART 3: RESISTANCE TO HIGH DIFFERENTIAL PRESSURE AND TO ELEVATED TEMPERATURE