GSO ISO 16332:2025
ISO 16332:2018
Gulf Standard
Current Edition
·
Approved on
14 October 2025
Diesel engines — Fuel filters — Method for evaluating fuel/water separation efficiency
GSO ISO 16332:2025 Files
English
44 Pages
Current Edition
Reference Language
OMR
83.7
GSO ISO 16332:2025 Scope
ISO 16332:2018 specifies a fuel/water separator comparison test under defined and simplified laboratory conditions.
This test is intended for pressure side fuel/water separators as well as for suction side fuel/water separators. Pressure side fuel/water separators are tested with fine droplets and suction side filters are tested with coarse droplets using the same test rig layout.
The rated flow (in litres per hour) is intended for the range between 50 l/h and 1 500 l/h. By agreement between customer and fuel/water separator manufacturer, and with some modifications, the procedures can be used for fuel/water separators with higher or lower flow rates.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO EN 131-3:2018+A1:2026
EN 131-3:2018+A1:2025
Gulf Standard
Ladders - Part 3: Marking and user instructions
OS GSO EN 17860-1:2026
EN 17860-1:2024
Omani Standard
Carrier cycles - Part 1: Terms and definitions
OS GSO ISO 17987-3:2026
ISO 17987-3:2025
Omani Standard
Road vehicles — Local Interconnect Network (LIN) — Part 3: Protocol specification
OS GSO EN 17860-2:2024+A1:2026
EN 17860-2:2024+A1:2026
Omani Standard
Carrier Cycles - Part 2: Lightweight single track carrier cycles - Mechanical aspects