GSO ISO/IEC 80079-20-1:2025

ISO/IEC 80079-20-1:2017
Gulf Standard   Current Edition · Approved on 22 April 2025

Explosive atmospheres — Part 20-1: Material characteristics for gas and vapour classification — Test methods and data

GSO ISO/IEC 80079-20-1:2025 Files

English 167 Pages
Current Edition Reference Language

GSO ISO/IEC 80079-20-1:2025 Scope

ISO/IEC 80079-20-1:2017 is published as a dual log standard and provides guidance on classification of gases and vapours. It describes a test method intended for the measurement of the maximum experimental safe gaps (MESG) for gas-air mixtures or vapour-air mixtures under normal conditions of temperature and pressure (20 °C, 101,3 kPa) so as to permit the selection of an appropriate group of equipment. This document also describes a test method intended for use in the determination of the auto-ignition temperature (AIT) of a vapour-air mixture or gas-air mixture at atmospheric pressure, so as to permit the selection of an appropriate temperature class of equipment. Values of chemical properties of materials are provided to assist in the selection of equipment to be used in hazardous areas. Further data may be added as the results of validated tests become available. The materials and the characteristics included in a table (see Annex B) have been selected with particular reference to the use of equipment in hazardous areas. The data in this document have been taken from a number of references which are given in the bibliography. These methods for determining the MESG or the AIT may also be used for gas-air-inert mixtures or vapour-air-inert mixtures. However, data on air-inert mixtures are not tabulated. Keywords: classification of gases and vapours, measurement of the maximum experimental safe gaps (MESG)

Best Sellers From Mechanical Sector

GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 98:1988
 
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF INTERIOR MATERIALS AND THEIR TESTING METHODS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
GSO 1780:2010
 
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements

Recently Published from Mechanical Sector

GSO ISO 7240-27:2026
ISO 7240-27:2025 
Gulf Standard
Fire detection and alarm systems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors
GSO ISO 8210:2026
ISO 8210:2021 
Gulf Standard
Equipment for harvesting — Combine harvesters — Test procedure and performance assessment
GSO ISO 5393:2026
ISO 5393:2017 
Gulf Standard
Rotary tools for threaded fasteners — Performance test method
GSO ISO 11681-2:2026
ISO 11681-2:2022 
Gulf Standard
Machinery for forestry — Portable chain-saw safety requirements and testing — Part 2: Chain-saws for tree service