GSO EN 74-2:2024
EN 74-2:2022
Gulf Standard
Current Edition
·
Approved on
14 October 2024
Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
GSO EN 74-2:2024 Files
English
43 Pages
Current Edition
Reference Language
Obtaining this standard through the store is currently unavailable. You can acquire it directly from its source.
GSO EN 74-2:2024 Scope
This document specifies:
— materials;
— design requirements;
— specified values for resistances and stiffnesses which a coupler has to achieve under test;
— test procedures and assessment;
for the following special couplers:
— screw or wedge half couplers, sleeve couplers with shear studs, right angle reduction couplers and swivel reduction couplers.
It gives recommendations for ongoing production control.
These couplers are for use principally in temporary works. Each coupler is able to be fixed to at least one side to one 48,3 mm diameter steel or aluminium tube. For the other side of reduction couplers, this document specifies requirements for the diameter and wall thickness of tubes.
Other special half couplers such as half couplers attached by riveting, used mainly for prefabricated members of scaffolds, are outside the scope of this document.
NOTE Information on design using special couplers is given in Annex B.
Best Sellers From Construction and Building Sector
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
GSO 2489:2015
Gulf Standard
Specifications of Recycled Aggregates from Construction
Waste to be used in construction Works
GSO 2084:2010
Gulf Standard
Design and application of speed control humps
Recently Published from Construction and Building Sector
OS GSO EN 13888-1:2026
EN 13888-1:2022
Omani Standard
Grouts for ceramic tiles - Part 1: Requirements, classification, designation, marking and labelling
OS GSO ASTM E2921:2026
ASTM E2921:25
Omani Standard
Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems
OS GSO ISO 16000-33:2026
ISO 16000-33:2024
Omani Standard
Indoor air — Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS)
OS GSO ISO 18393-1:2026
ISO 18393-1:2023
Omani Standard
Thermal insulation products — Determination of settlement — Part 1: Loose-fill insulation for ventilated attics simulating humidity and temperature cycling