GSO ASTM C452:2024
Gulf Standard
Current Edition
·
Approved on
25 April 2024
·
Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
GSO ASTM C452:2024 Files
No files are available for this standard right now!
GSO ASTM C452:2024 Scope
1.1 This test method, which is applicable only to portland
cements, covers the determination of the expansion of mortar
bars made from a mixture of portland cement and gypsum in
such proportions that the mixture has a sulfur trioxide (SO3)
content of 7.0 mass %.
1.2 The values stated in either SI units or inch-pound units
are to be regarded separately as standard. The values stated in
each system may not be exact equivalents; therefore, each
system shall be used independently of the other. Combining
values from the two systems may result in non-conformance
with the standard. Values in SI units [or inch-pound units] shall
be obtained by measurement in SI units [or inch pound units]
or by appropriate conversion, using the Rules for Conversion
and Rounding given in IEEE/ASTM SI 10, of measurements
made in other units (or SI units). Values are stated in only SI
units when inch-pound units are not used in practice.
1.3 This standard does not purport to address all of the
safety concerns, if any, associated with its use. It is the
responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
(Warning—Fresh hydraulic cementitious mixtures are caustic
and may cause chemical burns to skin and tissue upon
prolonged exposure.)
2
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the
Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical
Barriers to Trade (TBT) Committe
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
OS GSO 1431:2002
GSO 1431:2002
Omani Standard
Sanitary appliances - pressurized flushing devices
![OS Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_os_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
OS GSO 1427:2008
GSO 1427:2008
Omani Standard
Ceramic Sanitary Appliances - Western Water Closets
![OS Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_os_sml.png)
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
Recently Published from Construction and Building Sector
GSO ASTM E2129:2024
ASTM E2129:18
Gulf Standard
Standard Practice for Data Collection for Sustainability Assessment of Building Products
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ASTM Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_astm_sml.png)
GSO EN 196-3:2024
EN 196-3:2016
Gulf Standard
Methods of testing cement - Part 3: Determination of setting times and soundness
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
GSO ISO 10563:2024
ISO 10563:2023
Gulf Standard
Building and civil engineering sealants — Determination of change in mass and volume
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)
![ISO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_iso_sml.png)
GSO EN 933-2:2024
EN 933-2:2020
Gulf Standard
Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures
![GSO Standard](https://static.gso.org.sa/gso-uicore/assets/images/logo_gso_sml.png)