GSO EN 17347:2024

EN 17347:2021
Gulf Standard   Current Edition · Approved on 31 January 2024

Road vehicles - Machines for mounting and demounting vehicle tyres - Safety requirements

GSO EN 17347:2024 Files

English 50 Pages
Current Edition Reference Language

GSO EN 17347:2024 Scope

This Standard specifies the safety requisites requirements and their verification for the design and building of machines (see the definition in point 3.2) for mounting and demounting tyres on the vehicles listed below and identified according to the international categories M1, M2, N1, O1, O2, L4 and L5: a) cars b) buses c) lorries d) motor-vehicles for specific or special transport e) mobile homes f) cargo trailers g) car trailers h) motorised quadricycles i) motor vehicles j) mopeds k) agricultural machines (if the wheel/tyre dimensions are compatible with the maximum dimensions indicated in the tyre changer user instructions) The vehicles listed in points a) to f) must have an overall full-load mass no greater than 3.5 t. These machines are designed to ensure the tyre is correctly fitted on the wheel in safe conditions. The standard describes how to eliminate or reduce the risks resulting from the foreseen use (or improper but reasonably foreseeable use) of these machines by the operator during normal operation and service. In addition, it specifies the type of information that the manufacturer must supply with regards to safe working procedures. The Standard describes all the significant hazards (as listed in Table 1) and the danger situations and events relating to these machines. This Standard does not apply to hazards regarding maintenance or repairs carried out by professional maintenance personnel.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO ISO 7141:2026
ISO 7141:2022 
Gulf Standard
Road vehicles — Light alloy wheels — Lateral impact test
GSO ISO/TS 7815-1:2026
ISO/TS 7815-1:2025 
Gulf Standard
Intelligent transport systems — Telematics applications for regulated commercial freight vehicles (TARV) using ITS stations — Part 1: Secure vehicle interface framework and architecture
GSO ASTM D8002:2026
ASTM D8002:24 
Gulf Standard
Standard Test Method for Modified Fouling Index (MFI-0.45) of Water
GSO EN 1514-8:2026
EN 1514-8:2004 
Gulf Standard
Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 8: Polymeric O-Ring gaskets for grooved flanges