GSO IEC 62841-3-7:2024

IEC 62841-3-7:2020
Gulf Standard   Current Edition · Approved on 31 January 2024

Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-7: Particular requirements for transportable wall saws

GSO IEC 62841-3-7:2024 Files

GSO IEC 62841-3-7:2024 Scope

IEC 62841-3-7:2020 This document applies to transportable wall saws guided by a track guiding system intended for dry cutting or to be connected to a liquid system for cutting concrete, stone or similar material by means of a diamond wheel. The rated speed of the diamond wheel does not exceed a peripheral speed of 100 m/s at rated capacity.
The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools.
This document does not apply to transportable wall saws that are intended to be left unattended while performing an operation.
This document does not apply to transportable wall saws that employ hydraulic systems.
This document does not apply to hand-held cut-off machines.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 2530:2016
GSO 2530:2016 
Omani Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 34:2007
GSO 34:2007 
Omani Standard
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES

Recently Published from Electrical Sector

GSO IEC 63067:2024
IEC 63067:2020 
Gulf Standard
Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests
GSO IEC 60587:2024
IEC 60587:2022 
Gulf Standard
Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
GSO EN 12975:2024
EN 12975:2022 
Gulf Standard
Solar collectors - General requirements
GSO IEC 62386-103:2024
IEC 62386-103:2022 
Gulf Standard
Digital addressable lighting interface - Part 103: General requirements - Control devices