GSO IEC/IEEE 62271-37-013:2022

Gulf Standard   Current Edition
Approved on  12 May 2022

High-voltage switchgear and control gear - Part 37-013: Alternating-current generator circuit-breakers

High voltage switchgear and controlgear
Including enclosed switchgear and controlgear

GSO IEC/IEEE 62271-37-013:2022 Files

GSO IEC/IEEE 62271-37-013:2022 Scope

IEC/IEEE 62271-37-013:2015(E) is applicable to three-phase a.c. high-voltage generator circuit-breakers, hereafter called generator circuit-breaker, designed for indoor or outdoor installation and for operation at frequencies of 50 Hz and 60 Hz on systems having voltages above 1 kV and up to 38 kV. It is applicable to generator circuit-breakers that are installed between the generator and the transformer terminals. Requirements relative to generator circuit-breakers intended for use with generators and transformers rated 10 MVA or more are covered specifically. Generator circuits rated less than 10 MVA and pumped storage installations are considered special applications, and their requirements are not completely covered by this standard. This standard is also applicable to the operating mechanisms of generator circuit-breakers and to their auxiliary equipment. This standard has been prepared by a joint working group comprised of members both from IEC 17A/WG 52 representing subcommittee 17A: High-voltage switchgear and controlgear, of IEC technical committee 17: Switchgear and controlgear, in cooperation with IEEE WG P62271-37-013 representing the Switchgear Committee of the Power and Energy Society of the IEEE, under the IEC/IEEE Dual Logo Agreement.
The contents of the corrigendum of June 2017 have been included in this copy.

Best Sellers From Electrical Sector

GSO 2530:2016
 
Gulf Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 2530:2016
GSO 2530:2016 
Omani Standard
Energy Labelling And Minimum Energy Performance Requirements For Air-Conditioners
OS GSO 34:2007
GSO 34:2007 
Omani Standard
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES
GSO 34:2007
 
Gulf Technical Regulation
LEAD-ACID STARTER BATTERIES USED FOR MOTOR VEHICLES AND INTERNAL COMBUSTION ENGINES

Recently Published from Electrical Sector

GSO IEC 61318:2024
IEC 61318:2021 
Gulf Standard
Live working - Methods for assessment of defects and verification of performance applicable to tools, devices and equipment
GSO IEC/IEEE 60079-30-1:2024
IEC/IEEE 60079-30-1:2015 
Gulf Standard
Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements
GSO IEC 63244-1:2024
IEC 63244-1:2021 
Gulf Standard
Semiconductor devices - Semiconductor devices for wireless power transfer and charging - Part 1: General requirements and specifications
GSO IEC 62841-3-9:2024
IEC 62841-3-9:2020 
Gulf Standard
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-9: Particular requirements for transportable mitre saws