GSO ASTM D1552:2022

Gulf Standard   Current Edition
Approved on  12 May 2022

Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

GSO ASTM D1552:2022 Files

GSO ASTM D1552:2022 Scope

1.1 This test method covers procedures for the determination of total sulfur in petroleum products including lubricating oils containing additives, and in additive concentrates. This test method is applicable to samples boiling above 177 °C (350 °F) and containing a mass fraction of sulfur between 0.22 % and 24.2 %. Other sulfur concentrations may be analyzed, but the precision stated may or may not apply. These procedures use IR detection or TCD following combustion in a furnace. 1.2 Petroleum coke containing a mass fraction of sulfur between 2.53 % to 3.79 % sulfur may be analyzed. Other sulfur concentrations may be analyzed, but the precision stated may or may not apply. NOTE 1—The D1552–08 (2014) version of this standard contained two other procedures using iodate titrations. Since these procedures are no longer being used in the industry laboratories based on a survey of D02.SC 3 laboratories conducted in September 2014, they are being deleted. For earlier information on the deleted procedures, D1552–08 (2014) may be perused. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Best Sellers From Oil and Gas Sector

GSO 1785:2013
 
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines API Classifications
OS GSO 1785:2013
GSO 1785:2013 
Omani Standard
Lubricating Oils for Internal Combustion Engines API Classifications
GSO 1180:2021
 
Gulf Standard
Automatic transmission fluid (ATF)
OS GSO 672:2010
GSO 672:2010 
Omani Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).

Recently Published from Oil and Gas Sector

GSO 1785-2:2023
 
Gulf Technical Regulation
Lubricating Oils for Internal Combustion Engines – Part 2: ACEA European Oil Sequences for Gasoline Engines and Diesel Engines
GSO 1163:2023
 
Gulf Standard
Base Oils – Classification, Specifications and Test Methods
GSO ISO 18797-2:2023
ISO 18797-2:2021 
Gulf Standard
Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 2: Maintenance and field repair coatings for riser pipes
GSO ISO 6246:2023
ISO 6246:2017 
Gulf Standard
Petroleum products — Gum content of fuels — Jet evaporation method