GSO 1206:2022
Gulf Standard
Current Edition
Edition : 2
Approved on
12 May 2022
Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
GSO 1206:2022 Files
Arabic
23 Pages
Current Edition
Reference Language
17.0 OMR
English
15 Pages
Current Edition
14.0 OMR
GSO 1206:2022 Scope
1.1 This Gulf standard is concerned with the determination of basic constituents in petroleum products by titration with perchloric acid in glacial acetic acid..
1.2 Procedures A and B use different titration solvent volumes and sample weights.
NOTE (1) A round robin on a series of new and used oils and additive concentrates has shown that the two procedures give statistically equivalent results..
1.3 Appendix X2 provides the use of an alternative solvent system which eliminates the use of chlorobenzene in this test method. The use of the alternative solvent gives statistically equivalent results; however, the precision is worse. Paragraph X2.5.5 provides guidance when comparing results using the two different solvents.
1.4 The constituents that may be considered to have basic characteristics include organic and inorganic bases, amino compounds, salts of weak acids (soaps), basic salts of polyacidic bases, and salts of heavy metals.
NOTE (2) This test method is applicable to both fresh oils and used oils as described in Sections 16, 17, and 19 and Appendix X1..
1.5 This test method can be used to determine base number >300 mg KOH/g. However, the precision statement in Section 19 has been obtained only on base number ≤300 mg KOH/g.
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of the standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Best Sellers From Oil and Gas Sector
GSO 1785:2013
Gulf Technical Regulation
Lubricating Oils for Internal Combustion
Engines API Classifications

OS GSO 1785:2013
GSO 1785:2013
Omani Standard
Lubricating Oils for Internal Combustion
Engines API Classifications


OS GSO 672:2010
GSO 672:2010
Omani Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).


GSO 672:2010
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).

Recently Published from Oil and Gas Sector
GSO ASTM D7260:2023
ASTM D7260:20
Gulf Standard
Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants


GSO ISO 20074:2023
ISO 20074:2019
Gulf Standard
Petroleum and natural gas industry — Pipeline transportation systems — Geological hazard risk management for onshore pipeline


GSO ISO 19901-8:2023
ISO 19901-8:2014
Gulf Standard
Petroleum and natural gas industries — Specific requirements for offshore structures — Part 8: Marine soil investigations


GSO ASTM D7528:2023
ASTM D7528:21
Gulf Standard
Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

