GSO ASTM D5580:2021

ASTM D5580:15
Gulf Standard   Historical · Approved on 01 July 2021

Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

GSO ASTM D5580:2021 Files

English 11 Pages
Historical Reference Language

GSO ASTM D5580:2021 Scope

1.1 This test method covers the determination of benzene, toluene, ethylbenzene, the xylenes, C9 and heavier aromatics, and total aromatics in finished motor gasoline by gas chromatography. 1.2 The aromatic hydrocarbons are separated without interferences from other hydrocarbons in finished gasoline. Nonaromatic hydrocarbons having a boiling point greater than n-dodecane may cause interferences with the determination of the C9 and heavier aromatics. For the C8 aromatics, p-xylene and m-xylene co-elute while ethylbenzene and o-xylene are separated. The C9 and heavier aromatics are determined as a single group. 1.3 This test method covers the following concentration ranges, in liquid volume %, for the preceding aromatics: benzene, 0.1 to 5 %; toluene, 1 to 15 %; individual C8 aromatics, 0.5 to 10 %; total C9 and heavier aromatics, 5 to 30 %, and total aromatics, 10 to 80 %.

Best Sellers From Oil and Gas Sector

OS GSO 672:2010
GSO 672:2010 
Omani Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 672:2010
 
Gulf Standard
Liquefied petroleum gases (LPG) for household use( mixture of commerical propane and butane).
GSO 1180:2021
 
Gulf Standard
Automatic transmission fluid (ATF)
GSO 1161:2021
 
Gulf Standard
HLP HYDRAULIC OILS

Recently Published from Oil and Gas Sector

OS 1656:2025
 
Omani Standard
Liquefied petroleum Gas- propane butane mixture
OS 1656:2025
 
Omani Standard
Liquefied petroleum Gas- propane butane mixture
OS 1656:2025
 
Omani Standard
Liquefied petroleum Gas- propane butane mixture
GSO ASTM D3244:2024
ASTM D3244:21a 
Gulf Standard
Standard Practice for Utilization of Test Data to Determine Conformance with Specifications