GSO ASTM D1241:2021

Gulf Standard   Current Edition
· Approved on 01 July 2021 ·

Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

GSO ASTM D1241:2021 Files

English 3 Pages
Current Edition Reference Language

GSO ASTM D1241:2021 Scope

This specification covers the quality and grading of the following materials for use in the construction of subbase, base, and surface courses: sand-clay mixtures; gravel; stone or slag screenings; sand; crusher-run coarse aggregate consisting of gravel, crushed stone, or slag combined with soil mortar; or any combination of these materials. The requirements are intended to cover materials having normal specific gravity, absorption, and gradation characteristics. Where other materials are to be used, appropriate limits suitable to their use must be specified. The material shall be classified into two types namely Type I and Type II. Type I mixtures shall consist of stone, gravel, or slag with natural or crushed sand and fine mineral particles passing a No. 200 sieve and shall conform to the requirements specified for Gradation A, B, C, or D. On the other hand, Type II mixtures shall consist of natural or crushed sand with fine mineral particles passing a No. 200 sieve, with or without stone, gravel, or slag, and shall conform to the requirements specified for Gradation E or F. Different tests shall be conducted in order to determine the following properties of the aggregates: abrasion loss, liquid limit, plastic limit, and plasticity index.

Best Sellers From Construction and Building Sector

OS GSO 938:2009
GSO 938:2009 
Omani Standard
Test Methods for Chemical Properties of Portland Cement
GSO 938:2009
 
Gulf Standard
Test Methods for Chemical Properties of Portland Cement
OS GSO 1915:2009
GSO 1915:2009 
Omani Standard
Test Methods for Physical Properties of Portland Cement ICS :
GSO 1915:2009
 
Gulf Standard
Test Methods for Physical Properties of Portland Cement ICS :

Recently Published from Construction and Building Sector

GSO ASTM A1063/A1063M:2023
ASTM A1063/A1063M:22 
Gulf Standard
Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
GSO ASTM C33/C33M:2023
ASTM C33/C33M:18 
Gulf Standard
Standard Specification for Concrete Aggregates
GSO ASTM C31/C31M:2023
ASTM C31/C31M:22 
Gulf Standard
Standard Practice for Making and Curing Concrete Test Specimens in the Field
GSO ASTM A480/A480M:2023
ASTM A480/A480M:22a 
Gulf Standard
Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip