GSO EN 14313:2021
Gulf Standard
Current Edition
·
Approved on
01 July 2021
·
Thermal insulation products for building equipment and industrial installations. Factory made polyethylene foam (PEF) products
GSO EN 14313:2021 Files
No files are available for this standard right now!
GSO EN 14313:2021 Scope
This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 80 °C to + 150 °C. Tensile stress in the insulation product should be avoided when applying PEF. This is even more important when applying PEF on lines with operating temperatures between - 50 °C and - 80 °C. The tensile stress should be kept at the minimum by applying the foam “under pressure”, i.e. cutting the parts in a generous way. Manufacturer’s advice should be heeded in all cases. The products are manufactured in the form of tubes, profiles, sheets, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure systems. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard. This standard does not cover products for the insulation of the building structure. The normative part of this standard does not cover compressive stress (see C.4).
Best Sellers From Construction and Building Sector
GSO 1431:2002
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
OS GSO 1431:2002
GSO 1431:2002
Omani Standard
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
OS GSO 1427:2008
GSO 1427:2008
Omani Standard
Ceramic Sanitary Appliances - Western Water Closets
Recently Published from Construction and Building Sector
GSO EN 196-2:2024
EN 196-2:2013
Gulf Standard
Method of testing cement - Part 2: Chemical analysis of cement
GSO ASTM C185:2024
ASTM C185:20
Gulf Standard
Standard Test Method for Air Content of Hydraulic Cement Mortar
GSO 946:2024
Gulf Standard
Ceramic sanitary appliances :methods of tests for Eastern water closets
GSO ASTM D7851:2024
ASTM D7851:17
Gulf Standard
Standard Guide for Design of Sustainable, Low-Slope Roofing Systems