GSO EN 14313:2021

Gulf Standard   ACTIVE

Thermal insulation products for building equipment and industrial installations. Factory made polyethylene foam (PEF) products

Scope
This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 80 °C to + 150 °C. Tensile stress in the insulation product should be avoided when applying PEF. This is even more important when applying PEF on lines with operating temperatures between - 50 °C and - 80 °C. The tensile stress should be kept at the minimum by applying the foam “under pressure”, i.e. cutting the parts in a generous way. Manufacturer’s advice should be heeded in all cases. The products are manufactured in the form of tubes, profiles, sheets, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure systems. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard. This standard does not cover products for the insulation of the building structure. The normative part of this standard does not cover compressive stress (see C.4).
Adoption without modification
EN 14313:2015
01 July 2021

Files

 
 

Best Sellers From Construction and Building Sector

OS GSO 1914:2009
GSO 1914:2009 
Omani Standard
Portland Cement
GSO 1914:2009
 
Gulf Standard
Portland Cement
GSO 938:2009
 
Gulf Standard
Test Methods for Chemical Properties of Portland Cement
OS GSO 938:2009
GSO 938:2009 
Omani Standard
Test Methods for Chemical Properties of Portland Cement

Recently Published from Construction and Building Sector

GSO EN 1849-1:2021
EN 1849-1:1999 
Gulf Standard
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing
GSO EN 295-7:2021
EN 295-7:2013 
Gulf Standard
Vitrified clay pipe systems for drains and sewers - Part 7: Requirements for pipes and joints for pipe jacking
GSO EN 323:2021
EN 323:1993 
Gulf Standard
Wood-based panels - Determination of density
GSO EN 35:2021
EN 35:2014 
Gulf Standard
Pedestal and Wall-hung bidets with over-rim supply – Connecting dimensions