GSO ISO 18408:2021

ISO 18408:2019
Gulf Standard   Current Edition · Approved on 01 July 2021

Simplified structural design for reinforced concrete wall buildings

GSO ISO 18408:2021 Files

GSO ISO 18408:2021 Scope

This document applies to reinforced concrete building consisting of load bearing walls of reinforced concrete buildings [such buildings are called reinforced concrete box-shaped wall buildings and (RC wall building)] or to the part of RC wall building which uses both this and other types of structure.

This document applies to RC wall building as follows:

— RC wall building with 5 or fewer aboveground storeys;

— eaves height of 16 m or less;

— storey height on each storey of 3 m or less;

— on the top storey, the storey height can be 3,3 m or less;

— if the roof has a slope, the sum of the storey height of the top storey and the height from the eaves to the ridge of 4 m or less.

Deep foundations, such as piles and caissons, and their pile footings and caps, are beyond the scope of this document, and are not covered by it.

Best Sellers From Construction and Building Sector

GSO 1431:2002
 
Gulf Technical Regulation
Sanitary appliances - pressurized flushing devices
OS GSO 1431:2002
GSO 1431:2002 
Omani Standard
Sanitary appliances - pressurized flushing devices
GSO 1427:2008
 
Gulf Standard
Ceramic Sanitary Appliances - Western Water Closets
OS GSO 1427:2008
GSO 1427:2008 
Omani Standard
Ceramic Sanitary Appliances - Western Water Closets

Recently Published from Construction and Building Sector

GSO EN 13115:2026
EN 13115:2020 
Gulf Standard
Windows - Classification of mechanical properties - Racking, torsion and operating forces
GSO EN 1523:2026
EN 1523:1998 
Gulf Standard
Windows, doors, shutters and blinds - Bullet resistance - Test method
GSO ASTM C62:2026
ASTM C62:23 
Gulf Standard
Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale)
GSO ISO 9972:2026
ISO 9972:2015 
Gulf Standard
Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method