GSO ISO 14270:2021
ISO 14270:2016
Gulf Standard
Current Edition
·
Approved on
01 July 2021
Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
GSO ISO 14270:2021 Files
No files for this standard are available in the store currently.
GSO ISO 14270:2021 Scope
ISO 14270:2016 specifies specimen dimensions and a testing procedure for mechanized peel testing of single spot, seam and embossed projection welds, in overlapping sheets, in any metallic material of thickness 0,5 mm to 3 mm, where the welds have a maximum diameter of 7√t (where t is the sheet thickness in mm).
For welds of diameter between 5√t and 7√t, the peel strength values obtained may be lower than expected when using the recommended test specimen dimensions because the test specimen width is designed for welds of diameter of 5√t or less.
The object of mechanized peel testing is to determine the peel strength that the test specimen can sustain.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO 230:2005
Gulf Standard
MOTOR VEHICLES —
BRAKE FLUID – SIMULATED SERVICE
PERFORMANCE TEST
OS GSO 398:1994
GSO 398:1994
Omani Standard
Hydraulic pressure test for hollow bodies of various shapes up to a specified internal pressure.
OS GSO ISO 581:1997
ISO 581:1980
Omani Standard
Weldability- definition .
OS GSO ISO 4548-2:2002
ISO 4548-2:1997
Omani Standard
METHODS OF TEST FOR FULL-FLOW LUBRICATING
OIL FILTERS FOR INTERNAL COMBUSTION
ENGINES - PART 2: ELEMENT BY-PASS VALVE
CHARACTERISTICS