GSO ISO 19360:2021

ISO 19360:2016
Gulf Standard   Current Edition · Approved on 01 July 2021

Ships and marine technology — Marine cranes — Technical requirements for rigging applications

GSO ISO 19360:2021 Files

GSO ISO 19360:2021 Scope

Rigging used for marine cranes is mainly wire rope rigging. ISO 19360:2016 specifies the technical requirements of the selection and application of running rigging and standing rigging used for wire rope rigging of marine cranes.

ISO 19360:2016 specifies the minimum requirements of the allowable strength and performance level for wire ropes of marine cranes according to the design, application and maintenance requirements of cranes.

ISO 19360:2016 specifies the implementation criteria of installation, maintenance, inspection and discards for running rigging and standing rigging of marine cranes.

ISO 19360:2016 is applicable to the following types of marine crane:

- deck cranes mounted on ships for handling cargo or containers in harbour or sheltered water conditions;

- floating cranes or grab cranes mounted on barges or pontoons for operating in harbour conditions or sheltered water conditions;

- engine room cranes and provision cranes, etc. mounted on ships (including floating docks) for handling equipment and stores in harbour conditions.

ISO 19360:2016 does not apply to the following:

- loads from accidents or collisions;

- lifting operations below sea level;

- cranes which are supposed to be included in the class of the vessel and where the vessel receives a crane class notation; the contents of this document may be used however, as recommendation or guidance;

- other items where there is the danger that they might be considered in-scope are excluded from this document, such as

  • - loose gear items, such as the hook block, and
  • - ropes and fittings;

- cranes which are to be included in class by the class society;

- minimum ambient operating temperatures no less than −20 °C;

- maximum ambient operating temperatures above +45 °C;

- transport, assembly, dismantling and decommissioning of cranes;

- lifting accessories, i.e. any item between the crane and the load;

- lifting operations involving more than one crane;

- hand powered cranes;

- emergency rescue operations;

- shore-side cargo handling cranes;

- portable cranes on board;

- lifting appliances for lifeboats, liferafts accommodation ladders and pilot ladders;

- launching appliances for survival craft and rescue boats;

- gangways, accommodation and pilot ladders and their handling appliances.

Best Sellers From Mechanical Sector

OS GSO 42:2015
GSO 42:2015 
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
 
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
 
Gulf Technical Regulation
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993 
Omani Standard
MOTOR VEHICLES – DIMENSIONS AND WEIGHTS

Recently Published from Mechanical Sector

GSO EN 13445-6:2024
EN 13445-6:2021 
Gulf Standard
Unfired pressure vessels - Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron
GSO ISO 11154:2024
ISO 11154:2023 
Gulf Standard
Road vehicles — Roof load carriers
GSO ISO 10468:2024
ISO 10468:2023 
Gulf Standard
Glass-reinforced thermosetting plastics (GRP) pipes — Determination of the ring creep properties under wet or dry conditions
GSO ISO 10300-1:2024
ISO 10300-1:2023 
Gulf Standard
Calculation of load capacity of bevel gears — Part 1: Introduction and general influence factors