GSO ISO/TR 16907:2017
Gulf Standard
Current Edition
·
Approved on
03 October 2017
·
Machine tools -- Numerical compensation of geometric errors
GSO ISO/TR 16907:2017 Files
English
30 Pages
Current Edition
Reference Language
68.93 OMR
GSO ISO/TR 16907:2017 Scope
This Technical Report provides information for the understanding and the application of numerical compensation of geometric errors for numerically controlled machine tools including:
— terminology associated with numerical compensation;
— representation of error functions output from different measuring methods;
— identification and classification of compensation methods as currently applied by different CNCs;
— information for the understanding and application of different numerical compensations.
This Technical Report does not provide a detailed description of geometric errors measurement techniques that are specified in ISO 230 (all parts) and in machine tool specific performance evaluation standards and it is not meant to provide comprehensive theoretical and practical background on the existing technologies.
This Technical Report focuses on geometric errors of machine tools operating under no-load or quasi-static conditions. Errors resulting from the application of dynamic forces as well as other errors that might affect the finished part quality (e.g. tool wear) are not considered in this Technical Report.
Deformations due to changing static load by moving axes are considered in 7.4.2.
Best Sellers From Mechanical Sector
OS GSO 42:2015
GSO 42:2015
Omani Standard
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
OS GSO 159:1993
GSO 159:1993
Omani Standard
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
Recently Published from Mechanical Sector
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
GSO ISO 23598:2024
ISO 23598:2021
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO EN 14622:2024
EN 14622:2005
Gulf Standard
Devices to prevent pollution by backflow of potable water - Air gap with circular overflow (restricted) - Family A, type F